高掺量橡胶集料水泥砂浆收缩性能研究

为研究高掺量橡胶粉与膨胀剂对水泥砂浆收缩性能的影响,在水泥砂浆中分别单掺10％、20％、30％(体积分数)的20目(0.83 mm)、50目(0.27 mm)橡胶粉和4％、7％、10％(质量分数)的膨胀剂,在此基础上进行正交试验,测试复掺橡胶粉及膨胀剂砂浆的自由收缩性能.结果 表明:单掺时,水泥砂浆的自由收缩率随橡胶粉粒径减小、掺量增大而减小;20目橡胶粉掺量在30％、50目橡胶粉掺量大于10％、膨胀剂掺量为4％时,自由收缩率显著降低;复掺时,影响自由收缩的主要因素是橡胶粉;28 d前膨胀剂对自由收缩的影响较为明显,高掺量橡胶粉补偿后期收缩的作用显著,且对同期膨胀剂有一定促进作用;膨胀剂发挥最佳补偿收缩作用的掺量为2％,这一结果为膨胀剂在干旱地区橡胶砂浆中的应用提供了依据.     

Personalized broad learning system for facial expression

Multimedia Tools and Applications - Understanding human emotions through facial expressions is key enabling technology for interactive robots. Most approaches of facial expression recognition are...     

A computer aided design method for car form and its application based on shape parameters

In the early design stage, automotive modeling should both meet the requirements of aesthetics and engineering. Therefore, a vehicle CAD (computer aided design) model that can be easily adjusted by feedbacks is necessary. Based on CE-Bézier surface, this paper presents a set of algorithms for parametric segmentation and fairing surface generation in a car model. This model is defined by a simplified automotive template and relevant control points, shape parameters and segmentation parameters, which can be modified to alter the car form efficiently. With this model and the corresponding adjustment method, more than fifty various vehicle models are established in this research according to different parameters. And two methods for calculating similarity index between car models are constructed, which are suitable for brand design trend analysis and modelling design decisionmaking.     

Fe基非晶合金增强1060铝基多层复合材料的组织与性能

采用累积叠轧焊+中间退火法复合轧制1060Al/Fe基非晶多层铝合金复合板材。利用光学显微镜、扫描电镜、X-衍射分析仪以及拉伸试验机分析Al基复合材料的微观组织结构变化、断口形貌、物相组成以及力学性能。结果表明:Fe基非晶复合材料的增强体在300 ℃中间退火过程中发生部分晶化,在累积变形轧制过程中发生破碎,并随着变形道次的增加,破碎程度随之增大;复合板前6道次的累积轧制变形出现了明显的加工软化现象,并且随着变形道次的增加,其加工软化的效果愈明显;随着累积轧制变形道次增加,Al基复合材料的力学性能发生了明显的变化,第2道次轧制变形后屈服强度与抗拉强度达到了最大值为140 MPa和156 MPa,伸长率为5.53%,达到最佳综合性能。     

改性秸秆去除水体污染物的研究进展

水体污染物的高效去除是水生态持续健康发展中亟待解决的问题,而固载吸附是重要的治理途径。农作物秸秆因来源广及结构特殊等特点,受到研究者的广泛关注,用于开发新型高效吸附剂。综述了近年来改性秸秆在去除水体中重金属离子、有机污染物以及阴离子等方面的研究进展,并指出了改性秸秆吸附应用存在的不足及今后的研究方向,为开发新型秸秆吸附剂及农作物秸秆的高效利用提供参考。     

重力坝坝基多斜面抗滑稳定模糊体系可靠度研究

以基岩具有多斜面、多滑移通道的某实际重力坝工程为例,基于刚体极限平衡法,采用模糊理论和几种典型的体系可靠度计算方法,研究其典型坝段的坝基深层抗滑稳定模糊体系可靠度,探讨模糊理论中隶属函数形式、隶属度以及隶属函数中关键参数的取值对可靠度计算结果的影响。研究结果表明,采取限制失效概率模糊界限比的方法可使计算结果更具有参考性,考虑模糊性的抗滑稳定可靠指标的下限较常规可靠度计算值偏小,这在重力坝坝基抗滑稳定分析中应引起重视。     

航天用多弧段封头淬火装置优化设计

提出了某航天产品用多弧段封头产品的淬火处理方法;通过有限元分析,得出了多弧段封头在底部约束情况下的热处理畸变趋势;建立了多弧段封头淬火装置的三维模型,介绍了多弧段封头淬火装置的基本结构。通过有限元分析得出在淬火装置约束下,多弧段封头热处理,总畸变量为16.0 mm,Z向15.0 mm,X向8.5 mm。通过对多弧段封头淬火装置的热畸变情况分析,提出了淬火装置的优化设计方案,优化后的多弧段封头的热处理,总畸变量为7.0 mm,Z向10.0 mm,X向3.0 mm。解决了多弧段封头热处理畸变过大问题,并通过生产验证。     

薄壁弱刚性钛合金结构件制造工艺

随着新型材料冶金技术的发展与进步,钛合金作为“崛起的第三代金属”已完全替代了铝镁合金和钢构件,成为航天飞行器上应用范围最广的材料之一。从某新研制航天飞行器外部结构件用钛合金材料的特性及切削特点入手,针对薄壁弱刚性钛合金结构件在实际加工过程中遇到的诸多难点,提出了相应的解决办法,并重新设计了零件工装。结果表明,改进措施不仅保证了零件质量,而且提高了零件加工效率,使单件零件的生产周期缩短了近10h。     

红阳二矿12号煤层标志性气体实验研究

针对红阳二矿12号煤层遗煤氧化的规律与特点，有效地进行防灭火工作，掌握采空区中遗煤氧化的速度，对红阳二矿12号煤层进行了煤样升温氧化实验，在温度不断升高的过程中检测出CO与多种烯烃气体，并且在不同温度下煤体析出气体的速度不同，最终选择CO、C₂H₄、C₂H₂作为标志性气体，产生的临界温度分别为59、176、403 ℃。在采空区检测出CO气体，说明采空区遗煤进入快速氧化阶段；检测出C₂H₄气体时，遗煤进入剧烈氧化状态；检测出C₂H₂气体时，说明采空区中已经产生明火，井下人员需要迅速撤离。通过煤体标志性气体的确定，建立12号煤层自燃预警系统，保证井下工作人员的生命安全与能源的充分利用。     

A universal HF-free synthetic method to highly efficient narrow-band red-emitting A2XF6:Mn4+ (A = K,Na, Rb,Cs; X = Si,Ge, Ti) phosphors

Mn⁴⁺-activated fluoride red-emitting narrow-band phosphors have been successfully used in wide color-gamut white LEDs for liquid crystal display (LCD) backlights. However, highly concentrated and toxic HF is usually used in their synthesis, causing environment and safety issues. In this work, we proposed a HF-free green method, that is, using NH₄F/HCl instead of HF, to synthesize a series of A₂XF₆:Mn⁴⁺ (A = K, Na, Rb, Cs; X = Si, Ge, Ti) phosphors. The microstructure, photoluminescence (PL) properties, thermal quenching, and applications of the synthesized phosphors were investigated. Using the proposed approach, the phosphors generally showed a pure phase, a particle size ranging from 5 to 45 μm, and some characteristic sharp emission lines of Mn⁴⁺ in the red spectral range. The internal quantum efficiency was varied in a broad range of 69%-94% under the 460 nm excitation, depending on the composition of the fluoride host. Among these compositions, K₂XF₆:Mn⁴⁺ (X = Ge and Ti) phosphors even had a similar external quantum efficiency (>60%) with commercial ones. By combining K₂GeF₆:Mn⁴⁺ (narrow-band red) and β-sialon:Eu²⁺ (narrow-band green) with a blue LED, a white light-emitting diode (wLED) backlight with a color gamut of 87.7% National Television System Committee Standard, color temperature of 8423 K, and a luminous efficacy of 110.8 lm/W was demonstrated. These results indicate that the synthetic method proposed in this work is universal for preparing highly efficient fluoride phosphors used in wLEDs.